MODIFI3D: The 3D Print Finishing Tool

MODIFI3D: The 3D Print Finishing Tool

3D Printing

3D printers are fantastic things! Producing some great looking parts straight off the printer. However, if you actually own a desktop 3D printer you will know that this isn’t always the case and all kinds of printing errors can creep in. Removing support material can sometimes be a pain and what if you need to modify the part after printing? You won’t want to print the whole thing again if it can be avoided!… This is where the MODIFI3D Finishing Tool steps in. MODIFI3D offers a low cost solution to Finish, Repair and Modify 3D printed parts.


What is MODIFI3D?

MODIFI3D is a heated tool with specially coated interchangeable tips designed to finish, repair and modify 3D printed parts. MODIFI3D Is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints.

The pen like form of MODIFI3D makes it very comfortable to use and extremely easy to control when precision is important. MODIFI3D works with PLA, ABS and other 3D printing materials.


MODIFI3D Features

  • 4 interchangeable tips – Needle, knife, scoop and point tips.
  • Special tip coating to prevent sticking.
  • Rapid heat up in less than 15 seconds.
  • Sleep mode if not used for 25 seconds.
  • Lightweight, compact and easy to use.
  • Touch switch and indicator light.
  • USB powered (USB 2.0 or USB 3.0).
  • Basic stand included.

* – JUST A SIMPLE REMINDER: The unit is designed to operate best between 0.5 amps (USB 2.0) & 0.9amps (USB 3.0). Over this amperage level will burn out the tool. Under this level will produce problems with operation. For example, USB 1.1 is somewhat less than 0.5 amps & produces intermittent problems with the tool. iPhone chargers on the other hand produce much more than 1 amp and produce the opposite effect burning out the tool in short order.


MODIFI3D in Action…


Fuel3D Scanners

Fuel3D Scanners

Sometimes you need some inspiration. Sometimes you’re bored and can’t think of any thing to print. Sometimes you just want to capture something and see how it would print. A scanner does all this and more.

One such scanner is the Scanify scanner by Fuel3D. It’s handheld, fast and with a high resolution, the scanner delivers on the promise of portability and functionality in an affordable handheld device.

Imagine you’re walking the streets of Rome and happen on an old sculpture hidden in a back alley somewhere in a dusty, lost piazza. Not only can you take a picture of that sculpture but you can now scan that piece and bring it to life on a 3D printer. Or in this very same instance you instead are in Rome studying history for your final dissertation. This piece of sculpture just happens to capture the feel of your paper perfectly and would make a great companion piece to your work.

The possibilities are endless and your ability to capture all of them are limitless now with a portable, high speed, high resolution scanning technology like Scanify!

3D Fuel 3D Printer Filament

3D Fuel 3D Printer Filament

USA made, veteran owned 3D-Fuel provides the finest 3D printing filament in the world. Advanced or A- PLA filaments combine high heat resistance with high strength characteristics to produce the best performing PLA filament on the planet. A-PLA outperforms ABS plastic in several key areas making the oil based petro-chemical even less desirable especially in our children’s bedrooms.

  • 3D Fuel Advanced PLA™ Filament is produced from high heat grade PLA, which was developed specifically for the manufacturing of 3D printer filament. High heat grade resin exhibits improved heat-resistance and has faster crystallization rates.
When using 3D Fuel filament made from this resin, you
can expect: low odor, higher print detail/resolution, excellent first layer adhesion, improved adhesion between layers, and reduced warping, curling and failed prints (as reported by the resin manufacturer).
  • 3D Fuel Ingeo™ PLA Filament is produced from harvested plant sugars that are converted to lactic acid.  A safe material naturally present in our bodies and in many of our foods, this lactic acid building block is transformed into Ingeo™, a performance thermoplastic with physical characteristics and performance tailored for filament production and printing. Ingeo™ PLA has a quick transition from molten to solid, enabling it to provide more detail than most other plastics.
  • 3D Fuel Biome3D™ is a unique material with a silky texture that will help 3D prints stand out in a sea of 3D printed parts and prototypes.  It is a plant-based plastic that is biodegradable and is less brittle and more flexible than standard PLA filaments. Like PLA, Biome3D™‘s thermal and flow characteristics allow you to achieve excellent 3D printed detail. 3D print with minimal shrinkage, cracking or warping.

Enjoy this blog? Please spread the word :)